- SOBRE A SPM
- GRANDES FORNECIMENTOS
When you are first looking to source a stainless steel pipe, whether it’s for a desalination plant, an oil rig or even a nuclear power station, one of the first questions you need to ask yourself is ‘do I need a seamless, welded or forged pipe’? The three types all have different advantages and are therefore suited to different applications and environments. An abundance of factors should be taken into consideration when choosing what is right for a particular project.
Engineers will more than likely instinctively know the answer to that question, but let’s spend some time exploring these seamless, welded and forged pipes and their various properties.
Let’s start with seamless pipe. As the name suggested, a seamless pipe is one without any seam or weld-joint.
Seamless pipes can be manufactured using various different methods, which is very much dependent on the diameter required, or the ratio of the diameter to the thickness of the wall. In general, the manufacturing process of seamless pipe starts with raw steel being cast into a more workable format – a hot solid billet. This is then stretched out and pushed or pulled over a form. This hollow pipe then undergoes an extrusion process whereby it is forced through a die and mandrel. This works to increase the inside diameter and reduce the outside diameter.
Seamless steel pipe is regularly used in the transportation of fluids such as water, natural gas, waste and air. It is also regularly required in many high-pressure, high-corrosive environments such as in the oil & gas, power generation and pharmaceutical industries.
Welded pipe comes in three forms: welded on the outside diameter, welded on the inside diameter or welded on both sides. The commonality is that they all have a seam!
The manufacturing process of welded pipe starts by rolling out a steel coil to the desired thickness to form a flat strip or plate. This is then rolled, and the seam of the resultant tube is welded in a chemically neutral environment.
In regard to what type of steel is weldable, austenitic steels are generally the most weldable whereas ferritic steels are weldable in thin sections. Duplex steels are now regarded as fully weldable, but they do require more care than austenitic steels.
Welded pipe manufacturing techniques are thought to have greatly improved over the past few years. Arguably the most significant advancement being the development of using high-frequency electric currents as a welding technique. This has greatly improved the ability of welded pipe to avoid corrosion and seam failure.
While it is correct that the seam in a welded pipe makes it theoretically weaker, manufacturing methods and quality assurance procedures are far more superior these days. This means that as long as a welded pipe’s specified tolerances for temperature and pressure aren’t surpassed, there is no reason why is shouldn’t perform just as well as a seamless pipe in a wide array of industries.
Forging steel is a metal forming process that shapes metal using compressive force and extreme heat and pressure.
The manufacturing of a forged pipe starts with a piece of steel (whether that’s 6% Moly, Super Duplex, Duplex, Stainless Still, Nickel Alloy) being placed between an upper and lower die. Heat and pressure mould the steel into the desired shape and it is put through a machining process where it is finished to meet all of the required specifications.
This complex manufacturing process does result in higher cost implications for forged pipe.
The many advantages of forged pipe mean that it has a number of different applications in a diverse range of sectors such as oil, gas, hydraulic machinery, fertilisation and chemical. The fact that forged steel has no seam or welding point allows it to successfully contain potentially harmful or corrosive substances and their fumes. Therefore, it can be used in many heavy industries.
Whatever variety of seamless, welded or forged pipe you require, rest assured that Special Piping Materials is able to source and supply all sizes of seamless pipe, welded pipe and forged pipe. Our vast global network will be able to find and stock whichever type you need, in whatever material grade – be it super duplex, duplex, nickel alloy, 6% Moly or stainless steel. The trusted mills that we work with are highly efficient and specialists in their respective fields, ensuring that your products are exactly how you need them.